home *** CD-ROM | disk | FTP | other *** search
- Command and Conquer Level
-
- Level Name: Clean Up
- Created By: Lee 'Troll' Dove (lee.dove@dundee.att.gis)
- Release Date: 14th Febuary 1996 (St Val Massacre :))
- Completion Time: About 3 hours.
- Map information: Large (62x62), temperate theatre. New Map.
- Player: NOD
- Difficulty: Difficult (Can be completed without cheating)
- Filename: cleanup.zip
- File contents: cleanup.ini, cleanup.map,cleanup.sav, cleanup.txt
- Hardware used: Pentium 60Mhz
- Software used: ccmap ,mixman,baseit. All Great !!!
- Tested on Command and Conquer v1.18 (English version)
-
- Level replacement
- -----------------
- This file is meant to replace the last NOD mission. It may work when
- used with other missions, but has been tested specifically for this
- mission. If you use level 1 you don't get to build things !
-
-
- Mission Description
- -------------------
- After your superb job in Surgical Strike we have dicovered that the Engineer
- left some plans under his bunk . When you killed him these where not destroyed.
- You are now tasked with locating the building he was housed in and destroying
- these plans before GDI discovers them.
- We are not sure where the traitor was housed but our spies tell us that a large
- pilot training base and technical center is in the area .This seems a likely
- option but due to radio problems we can not be sure of the exact building.
- You should not need to worry about Stealth stuff as we think that without our
- Engineer GDI cannot make it work yet. GDI does have a good radar setup in this
- area so watch out for air attack.
- Good Luck you are on your own!
-
-
- Level Description
- -----------------
- This level is Tricky!.
- There should be no need to cheat as this level can be completed without
- changing any values like credits etc. Be prepared for a battle.
-
- Usage
- -----
- For those who don't want to bother messing around editing files, a savegame
- has been supplied that was taken the instant the level started. Simply copy
- this file (cleanup.sav) into your Command and Conquer directory (rename it
- to savegame.xxx where xxx is a number between 001 and 999). Then simply load that file
- when you start. You will not be able to restart the mission if you do this,
- you will have to re-load it if you need to try again. If you choose this
- method, you can ignore the next part.
-
- If you want something more complete, you need to have the NOD version of
- the general.mix file on your hard drive. You also need the program
- map-p.exe or mixman.exe.
- Put the file cleanup.ini into your Command and Conquer directory
- Now you need to patch the general.mix file with the cleanup.map and
- cleanup.ini.
-
-
-
- Other Information
- -----------------
- I hope you enjoy this mission. It is my second and I now appear to have production
- and triggers working much better.
- Send me your comments (good or bad).
- Lee Dove (The Troll Man)
-